5 Gallon Interior Clear Water Base Poly Flat N81246
Sale price
$26.99
Regular price $98.67
Skip to product information
General Finishes Clear Water Based Poly Top Coat - 5 Gallon - Flat - Enduro Clear Poly is a high-performing commercial-grade water-based topcoat fortified with polyurethane that delivers a clear, tough, durable and abrasion-resistant finish. It does not require a topcoat. Clear Poly can be used on any project where more solids (28%) and durability are desired.Please click the below headers to reveal the instructional info for this product. Step 1: Preparation for Clear Poly All wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. If you skip this critical step, your finish may fail. Preparation for Raw Wood or Raw Wood Projects That Are to be Stained Sanding Schedule: 120-grit followed by 150- or 220-grit sandpaper. Remove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag. Let dry completely before applying GF product. Do not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption. Do NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust. Preparation for Projects with an Existing Finish (Sealed Surface) For high-use areas with heavy grime build-up and oil from hands, give your project a deeper cleaning. Scuff clean with a Scotch Brite pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below. Sand lightly with a fine-grade (220-320) foam sanding pad. Remove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag. Let dry completely before applying General Finishes product. Power Prep Cleaning Highly Used Existing Finishes For high-use areas such as kitchen cabinets or table tops with heavy grime build-up and oil from hands, give your project a "Power" clean. Scrub clean with a detergent, such as Spic and Span or Dawn, using a Scotch Brite pad. Rinse well with water. Scrub clean with a Scotch Brite pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Sand lightly with a fine-grade (220-320) foam sanding pad. Remove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag. Let dry completely before applying General Finishes product. Alternative Cleaning Solutions For Existing Finishes (Not as aggressive or effective as denatured alcohol; requires rinsing.) 50:50 mix of bleach and water 50:50 mix of vinegar and water Mineral spirits can be used when working with water-based products, but only if the surface is thoroughly rinsed and allowed to dry for 72 hours. If you use with products containing phosphates (salt), which can linger in the substrate and produce a white haze, be sure to rinse thoroughly. Step 2: How to Apply General Finishes Clear Poly CAUTION: Do NOT use GF Clear Poly or any other clear coat, over white or light paints such as General Finishes Milk Paint, or General Finishes Enduro White Poly as it may cause yellowing. Any clear coat can become re
5 Gallon Interior Clear Water Base Poly Flat N81246
Sale price
$26.99
Regular price $98.67
Shipping calculated at checkout.